DATA ACQUISITION DEVICE

Part Number Description Supplier Availability Price Range
Data Acquisition Device
ADAM-4015 Datasheet
    __
RECENT LOW N/A
RECENT HIGH N/A
Check availability
The ADAQ4001 is a μModule® precision data acquisition (DAQ), signal chain solution that reduces the development cycle of a precision measurement system by transferring the signal chain design challenge of component selection, optimization, and layout from the designer to the device. Using system-in-package (SIP) technology, the ADAQ4001 reduces end system component count by combining multiple common signal processing and conditioning blocks into a single device. These blocks include a high resolution 16-bit, 2 MSPS successive approximation register (SAR), analog-to-digital converter (ADC), a low noise, fully differential ADC driver amplifier (FDA), and a stable reference buffer. Using Analog Devices, Inc., iPassives® technology, the ADAQ4001 also incorporates crucial passive components with superior matching and drift characteristics to minimize temperature dependent error sources and to offer optimized performance (see Figure 1 in the data sheet). Housing this signal chain solution in a small, 7 mm × 7 mm, 0.80 mm pitch, 49-ball CSP_BGA enables compact form factor designs without sacrificing performance and simplifies end system bill of materials management. This level of system integration makes the ADAQ4001 much less sensitive to printed circuit board (PCB) layout while still providing flexibility to adapt to a wide range of signal levels. The serial peripheral interface (SPI)-compatible, serial user interface is compatible with 1.8 V, 2.5 V, 3 V, or 5 V logic, using a separate VIO supply. Specified operation of the ADAQ4001 is from −40°C to +125°C.APPLICATIONSAutomatic test equipmentMachine automationProcess controlsMedical instrumentationDigital control loops
ADAQ4001BBCZ-RL13 Datasheet
    __
RECENT LOW N/A
RECENT HIGH N/A
Check availability
Data Acquisition Device
ADAM-4115 Datasheet
    __
RECENT LOW N/A
RECENT HIGH N/A
Check availability
The ADAQ8092 is a 14-bit, 105 MSPS, high-speed dual-channel data acquisition (DAQ) μModule® solution. The device incorporates signal conditioning, an analog-to-digital (ADC) driver, a voltage reference, and an ADC in a single package via system in package (SiP) technology. μModule solutions simplify the development of high-speed data acquisition systems by transferring the design burden, component selection, optimization, and layout from the designer to the device. The ADAQ8092 enables a 6× footprint reduction.Built-in power supply decoupling capacitors enhance power supply rejection performance, making it a robust DAQ solution. The operating temperature range of the ADAQ8092 is −40°C to +105°C.APPLICATIONS Communications Cellular base stations
ADAQ8092BBCZ Datasheet
    __
RECENT LOW N/A
RECENT HIGH N/A
Check availability
24-Bit, 1 Func, 2 Channel, Hybrid
PXI-4462 Datasheet
    __
RECENT LOW N/A
RECENT HIGH N/A
Check availability
24-Bit, 1 Func, 4 Channel, Hybrid
PCI-4462 Datasheet
    __
RECENT LOW N/A
RECENT HIGH N/A
Check availability
The ADAQ23878 is a precision, high speed, μModule® data acquisition solution that reduces the development cycle of a precision measurement systems by transferring the design burden of component selection, optimization, and layout from the designer to the device.Using System-in-Package (SIP) technology, the ADAQ23878 reduces end system component count by combining multiple common signal processing and conditioning blocks in a single device, including a low noise, fully differential ADC driver (FDA), a stable reference buffer, and a high speed, 18-bit, 15 MSPS successive approximation register (SAR) ADC.The ADAQ23878 also incorporates the critical passive components with superior matching and drift characteristics using Analog Devices, Inc., iPassive® technology to minimize temperature dependent error sources and to offer optimized performance. The fast settling of the ADC driver stage and no latency of the SAR ADC provide a unique solution for high channel count multiplexed signal chain architectures and control loop applications.The small footprint, 9 mm × 9 mm BGA package enables smaller form factor instruments without sacrificing performance. The system integration solves many design challenges while the device still provides the flexibility of a configurable ADC driver feedback loop to allow gain or attenuation adjustments, as well as fully differential or single-ended to differential input. A single 5 V supply operation is possible while achieving optimum performance from the device.The ADAQ23878 features a serial low voltage differential signaling (LVDS) digital interface with one-lane or two-lane output modes, allowing the user to optimize the interface data rate for each application. The specified operation of the ADAQ23878 is from −40°C to +85°C.APPLICATIONS Automatic test equipment Data acquisition Hardware in the Loop (HiL) Power analyzers Non-destructive test (acoustic emissions) Mass spectrometry Travelling wave fault location Medical imaging and instruments
ADAQ23878BBCZ Datasheet
    __
RECENT LOW N/A
RECENT HIGH N/A
Check availability
24-Bit, 1 Func, 2 Channel, Hybrid
PXI-4461 Datasheet
    __
RECENT LOW N/A
RECENT HIGH N/A
Check availability
DATA ACQUISITION DEVICE
MIC-1816R-AE Datasheet
    __
RECENT LOW N/A
RECENT HIGH N/A
Check availability
The ADAQ4001 is a μModule® precision data acquisition (DAQ), signal chain solution that reduces the development cycle of a precision measurement system by transferring the signal chain design challenge of component selection, optimization, and layout from the designer to the device. Using system-in-package (SIP) technology, the ADAQ4001 reduces end system component count by combining multiple common signal processing and conditioning blocks into a single device. These blocks include a high resolution 16-bit, 2 MSPS successive approximation register (SAR), analog-to-digital converter (ADC), a low noise, fully differential ADC driver amplifier (FDA), and a stable reference buffer. Using Analog Devices, Inc., iPassives® technology, the ADAQ4001 also incorporates crucial passive components with superior matching and drift characteristics to minimize temperature dependent error sources and to offer optimized performance (see Figure 1 in the data sheet). Housing this signal chain solution in a small, 7 mm × 7 mm, 0.80 mm pitch, 49-ball CSP_BGA enables compact form factor designs without sacrificing performance and simplifies end system bill of materials management. This level of system integration makes the ADAQ4001 much less sensitive to printed circuit board (PCB) layout while still providing flexibility to adapt to a wide range of signal levels. The serial peripheral interface (SPI)-compatible, serial user interface is compatible with 1.8 V, 2.5 V, 3 V, or 5 V logic, using a separate VIO supply. Specified operation of the ADAQ4001 is from −40°C to +125°C.APPLICATIONSAutomatic test equipmentMachine automationProcess controlsMedical instrumentationDigital control loops
ADAQ4001BBCZ Datasheet
    __
RECENT LOW N/A
RECENT HIGH N/A
Check availability
ADC, Successive Approximation
MAX17823BGCB+T Datasheet
    __
RECENT LOW N/A
RECENT HIGH N/A
Check availability
24-Bit, 1 Func, 4 Channel, Hybrid
PCI-4461 Datasheet
    __
RECENT LOW N/A
RECENT HIGH N/A
Check availability
62225fe4457268f4945f07f2_quotengine_point-downicon-quote-it-whiteGroup 10icon-suppliericon-supplier-applicationsupplier iconicon/purchasesGroup 2btn-logoicon/saved-carticon/search-logfacebooklinkedinTwitterxing