PT65101L508
APEM Components, Inc.
- Lifecycle statusActive
- RoHSRoHS compliant
- DescriptionSwitch DIP N.O./N.C. SP10T 10 Flush Screwdriver 0.15A 42VDC PC Pins 10000Cycles 2.54mm Thru-Hole Tube
- Category
- ECCNEAR99
- ECCN GovernanceEAR
- HTS Code8536.50.90.20
- SB Code8536.50.90.20
- SealingMOLDED
- Switch TypeROTARY CODED SWITCH
- Actuator TypeSCREW DRIVER
- Switch ActionLATCHED
- J-STD-609 Codee3
- PCB Hole Count6
- Packing MethodTUBE
- Switch FunctionBINARY CODED DECIMAL
- Terminal FinishTin (Sn)
- Body Height (mm)10
- Housing MaterialTHERMOPLASTIC
- Mounting FeatureTHROUGH HOLE-RIGHT ANGLE
- Termination TypeSOLDER
- Body Breadth (mm)6.5
- Additional FeatureO-RING Si RUBBER ACTUATOR SEAL
- Insulator MaterialTHERMOPLASTIC
- End Contact PlatingGOLD OVER NICKEL
- Number of Positions10
- End Contact MaterialPHOSPHOR BRONZE
- Indexing Angle (deg)36.0000
- Center Contact PlatingGOLD OVER NICKEL
- Center Contact MaterialPHOSPHOR BRONZE
- Contact Resistance (mohm)80
- Number of Switch Sections1
- Electrical Life (Cycle(s))10000
- Contact Current(DC)-Max (A)0.4
- Contact Voltage(DC)-Max (V)24
- Insulation Resistance (ohm)100000000
- Body Length or Diameter (mm)10
- Contact DC Max Rating R Load.4A@24VDC
- Operating Temperature-Max (Cel)70
- Operating Temperature-Min (Cel)-20
- Length0.394" (10.00mm)
0 suppliers available to buy or to bid for PT65101L508
Send an RFQ
Send an RFQ Your RFQ will be directly sent to our expert: Pari
Send an RFQ
PT65101L508
Send an RFQ
PT65101L508