BT2N-2M4
FUJISOKU CORP
- Lifecycle statusTransferred
- DescriptionToggle Switch, DPDT, On-on, Latched, 0.05A, 20VDC, 10 PCB Hole Cnt, Solder Terminal, Toggle Bat Actuator, Through Hole-straight
- Category
- ECCNEAR99
- ECCN GovernanceEAR
- HTS Code8536.50.90.65
- SB Code8536.50.90.65
- SealingEPOXY
- Switch TypeTOGGLE SWITCH
- WashabilitySOLVENT
- Actuator TypeTOGGLE BAT
- SolderabilityHAND
- Switch ActionLATCHED
- Contact TimingBREAK-BEFORE-MAKE
- PCB Hole Count10
- Switch FunctionDPDT
- Body Height (mm)13.0048
- Contact FunctionON-ON
- Mounting FeatureTHROUGH HOLE-STRAIGHT
- Termination TypeSOLDER
- Body Breadth (mm)12.7
- Additional FeatureWITH BRACKET
- End Contact PlatingGOLD
- Actuator Angle (deg)25
- Bushing Length (inch)0.315
- Actuator Length (inch)0.413
- Center Contact PlatingGOLD
- Terminal Length (inch)0.138
- Bushing Diameter (inch)0.244
- Contact Resistance (mohm)50
- Electrical Life (Cycle(s))50000
- Contact Current(AC)-Max (A)0.05
- Contact Current(DC)-Max (A)0.05
- Contact Voltage(AC)-Max (V)20
- Contact Voltage(DC)-Max (V)20
- Insulation Resistance (ohm)10000000000
- Body Length or Diameter (mm)15.7988
- Contact AC Max Rating R Load0.05A@20VAC
- Contact DC Max Rating R Load0.05A@20VDC
- Dielectric Withstand Volts (V)500VAC
- Operating Temperature-Max (Cel)85
- Operating Temperature-Min (Cel)-20
0 suppliers available to buy or to bid for BT2N-2M4
Send an RFQ
Send an RFQ Your RFQ will be directly sent to our expert: Pari
Send an RFQ
BT2N-2M4
Send an RFQ
BT2N-2M4